PN-002In buildStarted 2026All projects

Low-cost bimanual humanoid arm

A torso-mounted bimanual arm for imitation-learning data collection, built from quasi-direct-drive BLDC actuators, a brushless motor behind a single low-ratio planetary stage rather than a high-ratio gearbox. That is what keeps every joint backdrivable enough to be moved by hand through a demonstration, and every actuator cheap enough to repeat across both arms.

mechanismsactuatorsimitation learning

Line drawing of the bimanual arm seen from the front, both six-axis arms hanging from a hexagonal torso hub on a square-section post and base plate, each arm running shoulder actuator, webbed upper link, elbow, forearm and a two-finger servo gripper
  1. Marked at upper centre of the drawing.
  2. Marked at upper right of the drawing.
  3. Marked at centre right of the drawing.
  4. Marked at lower right of the drawing.
  5. Marked at lower right of the drawing.
  6. Marked at lower centre of the drawing.
  7. Marked at upper centre of the drawing.

Low-cost bimanual humanoid arm

Part
PN-002
Scale
NTS
Drawn
TM
Started
2026
Type
drawing

Description

Coming soon

This arm is still being built, so the full write-up is not here yet. Build progress, test results and design changes go into the notebook as they happen. Check there for updates.